Yaesu WIRES-X FT3DE User Manual

Wide-Coverage Internet Repeater Enhancement System
WIRES-X Portable Digital Node Function
Instruction Manual
The C4FM digital transceivers that support the Portable Digital Node Function are
FT5D, FT3D, FT2D, FTM-500D, FTM-400XD/D, FTM-300D, FTM-200D and FTM-
100D. (As of Apr 2023)
Other C4FM digital transceivers do not require WIRES-X user registration and may
immediately enjoy Internet communications by connecting to a WIRES-X local node
that is within radio range.

Yaesu WIRES-X FT3DE Specifications

General

Brand	Yaesu
Model	WIRES-X FT3DE
Category	Transceiver
Language	English

Summary

WIRES-X Portable Digital Node Function

Supported Transceivers

Lists compatible Yaesu C4FM transceivers for the Portable Digital Node Function.

Preparation Procedure

User Registration

Acquire a WIRES-X ID by registering on the website using the transceiver's Radio ID.

Install WIRES-X Software and Drivers

Download and install WIRES-X software and USB device driver for PC connection.

Update Transceiver Firmware

Download and install the latest firmware for the transceiver for optimal functionality.

Connect Transceiver and PC

Connect the compatible transceiver to the PC using designated cables for operation.

Initial Setting

Start Transceiver and Authenticate Server

Start transceiver in special mode and authenticate WIRES-X server with Node/Room IDs.

Transceiver Settings for Access Point

Configure operating frequency and DG-ID number on the transceiver for Access Point mode.

Basic Operation

Portable Digital Node Mode Operation

Connect transceiver, start software, and start transceiver in special mode for PDN operation.

Start Portable Node Operation

Initiate Portable Node operation by pressing transceiver keys and checking connection status.

Connecting to Nodes and Rooms

Connect via WIRES-X Software

Connect to digital nodes/rooms using WIRES-X software by selecting from available lists.

Connect via Transceiver

Connect to digital nodes/rooms by operating the transceiver using search or category lists.

Using the Portable HRI Mode

Start Transceiver and Connect to Node/Room

Start transceiver in special mode and connect to nodes/rooms via WIRES-X software interface.

Communicating and Managing Connections

Communication Modes and Disconnecting

Communicate via Access Point/Direct Operation; disconnect from nodes/rooms.

Closing WIRES-X Software

Exit the WIRES-X software application properly.

WIRES-X Software Main Screen

Understanding the Main Screen Layout

Overview of the WIRES-X software interface, including menus, windows, and status indicators.

Node and Room Icons

Explains icons for node station types and room connection statuses in WIRES-X software.

Functions to Use as Necessary

Audio Volume Adjustment

Adjust PC audio levels for microphone input and speaker output for optimal HRI Mode performance.

Microphone Input Level Adjustment

Configure PC microphone input levels for clear audio transmission in Portable Digital Node or HRI Mode.

Speaker Output Level Adjustment

Adjust PC speaker output levels for clear audio reception, ensuring proper communication volume.

Analog Audio for Direct Operation (FT5D/FT3D/FT2D)

Configure analog audio output settings for Direct Operation using specific FT5D/FT3D/FT2D transceivers.

Bookmarking Nodes and Rooms

Add to Bookmark List

Save frequently accessed nodes or rooms to a bookmark list for quick access in WIRES-X software.