Need help?Do you have a question about the Yaesu FT3DR and is the answer not in the manual?
General| Frequency Range (Tx) | 144 - 148 MHz, 430 - 450 MHz |
|---|---|
| Circuit Type | Double-Conversion Superheterodyne |
| GPS | Yes |
| Bluetooth | Yes |
| Waterproof Rating | IP54 |
| Frequency Range (Rx) | 0.5 - 999.99 MHz |
| Modulation Modes | FM |
| Power Output | 5 W |
| Channel Capacity | 1000 channels |
| Operating Voltage | 7.4V DC |
| Display | Color TFT |
| Digital Modes | C4FM |
| Battery | 2000 mAh Li-ion |
| Dimensions | 60 x 100 x 33 mm |
| Weight | 280 g |
Overview of the FT3DR/DE transceiver's capabilities and functions.
Identifying transceiver components, controls, and initial setup procedures.
Procedures for installing, charging the battery, and using microSD memory cards.
Turning the transceiver on/off, adjusting volume, squelch, and inputting call sign.
Selecting frequency bands, tuning to frequencies, and choosing communication modes.
Registering, recalling, clearing, and tagging memory channels and banks.
Utilizing VFO/Memory scanning, setting scan resume, and weather alerts.
Pairing Bluetooth headsets, VOX operation, and related settings.
Voice recording, taking pictures, internet communication, and packet data features.
Guide to Set Mode and configuring display, language, and audio parameters.
Adjusting transmission, reception, memory, signaling, and scanning configurations.
Managing system config, APRS, microSD card, Bluetooth, and callsign settings.
Resetting the transceiver, viewing technical specifications, and warranty information.
To Next Page
