Yaesu FT3DR - Set Mode: CALLSIGN Menu Operations

87
Set Mode: CALLSIGN Menu Operations
1. Press and hold the [DISP] key, and then touch [CALLSIGN].
2. Enter a call sign using the alphabet input screen and the ten key input screen.
• The alphabet input screen can be switched to the number input screen by touching
[123].
• The number input screen can be switched to the alphabet input screen by touching
[ABC].
• Up to 10 characters can be entered.
• Characters that may be entered for the call sign are the numbers 0-9, letters “A – Z” in
upper case, the hyphen and the slash..
3. After inputting the call sign, press the PTT switch or press and hold the [DISP] key.