Yaesu FT3DR - Setting the Memory Channels Used for Registration

71
6 Setting the Memory Channels Used for Registration
Set whether to register to the lowest unused memory channel number following the chan-
nel number you most recently used, or to the lowest unused memory channel number.
1. Press and hold the [DISP] key, and then touch [MEMORY].
2. Touch [6 MEMORY WRITE].
3. Rotate the DIAL knob to select the desired setting.
NEXT Registers to the smallest unused memory channel number which
comes after the channel number you used most recently.
LOWER Registers to the unused memory channel having the lowest memory
number.
Remark The default setting: NEXT