70
Set Mode: MEMORY Menu Operations
1 Setting Memory Bank Link
You can link multiple registered memory banks so that you can recall frequently used
memory banks immediately.
1. Press and hold the [DISP] key, and then touch [MEMORY].
2. Touch [1 BANK LINK].
3. Rotate the DIAL knob to select the memory bank you want to link, then press the
[DISP] key.
The checkbox is checked.
4. Repeat step 3 to link the memory banks one by one from BANK 1 to BANK 24.
2 Assigning Name to Memory Bank
By selecting [2 BANK NAME], you can assign a name to each memory bank using up to
16 characters.
For additional details, refer to the Advanced Manual which may be downloaded from the
Yaesu website.
3 Assigning Name to Memory Channel
By selecting [3 MEMORY NAME], you can assign a name such as a call sign and broad-
cast station name to each memory channel and home channel.
For additional details, refer to the Advanced Manual which may be downloaded from the
Yaesu website.
4 Memory Channel Protect Function
A memory channel may be protected so that a new frequency or memory channel tag
name cannot be registered to it.
1. Press and hold the [DISP] key, and then touch [MEMORY].
2. Touch [4 MEMORY PROTECT].
3. Rotate the DIAL knob to select the desired setting.
OFF Allows registering to registering to memory channels.
ON Prohibits registering to memory channels.
Remark The default setting: OFF
5 Setting Memory Skip Function
By selecting [5 MEMORY SKIP], you can set the scan method for scanning memory
channels.
For additional details, refer to the Advanced Manual which may be downloaded from the
Yaesu website.
To Next Page
Loading...
