84
Set Mode: SD CARD Menu Operations
1 Saving/Loading Data to/from microSD Memory Card
Settings information can be saved to a microSD memory card, also the saved informa-
tion can be loaded to the transceiver.
1. Press and hold the [DISP] key, and then touch [SD CARD].
2. Rotate the DIAL, then touch [1 BACKUP].
3. Rotate the DIAL knob to select the operation to be performed.
Write to SD Saves the transceiver setting information to a microSD memory
card.
Read from SD Loads the information to the transceiver from a microSD memory
card.
4. Press the [DISP] key.
A pop-up window appears on the LCD.
5. Touch [OK] twice.
6. When [Write to SD] is selected and data writing completes, a beep sounds and
“COMPLETED” appears on the LCD.
7. When [Read from SD] is selected and data reading completes, a beep sounds,
then the transceiver restarts with the settings read from the microSD memory card
applied.
2 Saving/Loading Memory Channel Information to/from
microSD Memory Card
Memory channel setting information can be saved onto a microSD memory card, or
saved information can be loaded to the transceiver.
1. Press and hold the [DISP] key, and then touch [SD CARD].
2. Rotate the DIAL, then touch [2 MEMORY CH].
3. Rotate the DIAL knob to select the operation to be performed.
Write to SD
Saves the memory channel information saved on the transceiver
onto a microSD memory card.
Read from SD Loads the information to the transceiver from the microSD mem-
ory card.
4. Press the [DISP] key.
A pop-up window appears on the LCD.
5. Touch [OK] twice.
6. When [Write to SD] is selected and data writing completes, a beep sounds and
“COMPLETED” appears on the LCD.
7. When [Read from SD] is selected and data reading completes, a beep sounds,
then the transceiver restarts with the settings read from the microSD memory card
applied.
To Next Page
Loading...
