Need help?Do you have a question about the Yaesu FT5De and is the answer not in the manual?
General| GPS | Yes |
|---|---|
| Bluetooth | Yes |
| Operating Modes | Simplex, Duplex, Repeater |
| Frequency Range | 144-148 MHz, 430-450 MHz |
| Modulation | FM |
| Power Output | 5W / 2.5W / 1W |
| Battery | 2000 mAh Li-ion |
| Display | Color TFT |
| Receiver Type | Superheterodyne |
Lists the key features and capabilities of the FT5DR/DE transceiver.
Instructions for powering the transceiver on and initial call sign input.
How to tune frequencies and switch between operating bands.
Steps to adjust volume and squelch levels for optimal listening.
How to select communication modes and basic transmission/reception.
Guidance on configuring the Bluetooth function for wireless accessories.
Identifies and describes the external controls and connectors of the transceiver.
Details features like jacks, slots, and antenna connection points.
Describes the function of each key when pressed or held.
Explains the various icons and indicators shown in the status bar.
Details the dual band display modes and their elements.
How dual and mono band screens operate and their features.
Overview of the function menu screens and navigation methods.
How to use the PMG screen for monitoring frequently used frequencies.
How to use the CAM screen for monitoring selected memory channels.
How to use the Band Scope for spectrum analysis.
How to use the Group Monitor function to track stations.
How to monitor multiple bands and use backtrack navigation.
How to view GPS satellite status and location data.
How to access and navigate the setup menu.
Lists the items included in the package with the transceiver.
Lists optional accessories that can be purchased for the transceiver.
Instructions for correctly attaching the antenna and installing the battery pack.
Guide on attaching the quick release holster and belt clip.
Detailed steps for charging the battery pack using different chargers.
Information on battery life and how to interpret charge level indicators.
How to power the transceiver using external sources like vehicles.
Functions and benefits of using a microSD card for data storage.
Step-by-step guide to insert and remove microSD cards.
Steps to power the transceiver on and enter the initial call sign.
How to adjust the volume for different bands and radio modes.
How to adjust squelch for different bands and modes for clear reception.
How to switch between A-band and B-band as the active operating band.
How to switch between dual-band and mono-band display modes.
How to choose and set frequency bands for A and B bands.
Methods for tuning to specific frequencies using DIAL or numeric keys.
How to adjust the frequency step for fine-tuning.
Using AMS to automatically select modes or fixing the mode manually.
How to manually select and fix the desired communication mode.
Basic procedure for transmitting and understanding the TX/BUSY LED.
How to adjust the transmit power output for different situations.
How to lock/unlock the keys and DIAL knob to prevent accidental changes.
Explains the DG-ID feature for group communication and selective calling.
Guidance on using the DG-ID feature for communication and setting IDs.
How to set DG-ID to "00" for general communication with all stations.
Steps to communicate using repeaters with the Automatic Repeater Shift feature.
How to temporarily reverse frequencies for direct communication checks.
How to use the 1750 Hz tone for accessing European repeaters.
Step-by-step guide to save frequencies and settings into memory.
How to retrieve stored memory channels for use.
Using MAG to recall memories grouped by frequency band.
How to delete stored memory channels from the transceiver.
How to recover accidentally erased memory channels.
How to assign names or tags to memory channels for easy identification.
How to recall and use pre-defined home channels.
How to set or update home channel frequencies and associated data.
Viewing lists and organizing channels into memory banks.
Using split memory and restricting operation to memory channels.
Steps to add frequently used frequencies to the PMG for monitoring.
How to switch frequencies by touching the PMG bar graph.
How to remove frequencies from the PMG.
How to turn off the PMG function entirely.
Steps to add memory channels to a CAM group for monitoring.
How to edit the contents of a CAM group.
Selecting a memory channel for registration within a CAM group.
Adding selected memory channels to CAM groups.
Switching frequencies by touching the CAM bar graph.
How to switch between different CAM groups for monitoring.
How to clear all channels from a CAM group at once.
How to change the name or tag of a CAM group.
How to change the center frequency displayed in the Band Scope.
How to adjust the number of channels shown in the Band Scope view.
How to perform a scan across VFO frequencies to find signals.
How to scan through stored memory channels for activity.
How to configure the transceiver's behavior when a scan pauses.
How to enable and use the Weather Alert Scan feature for alerts.
How to configure channels for effective memory scanning.
How to use the Programmable Memory Scan feature for frequency ranges.
How to enable and use the Dual Receive feature for monitoring two frequencies.
How to set up and use Bluetooth connectivity for audio accessories.
Step-by-step guide for initial Bluetooth pairing with a headset.
How to turn off the Bluetooth function to conserve power or for other reasons.
How Bluetooth headsets reconnect automatically when the transceiver is powered on.
How to connect to other Bluetooth headsets besides the primary one.
How to delete paired Bluetooth devices from the transceiver's list.
How to view the list of registered Bluetooth devices currently available.
How to enable and set VOX parameters like gain and mode.
How to turn off the VOX function to revert to PTT operation.
How to adjust the VOX transmission delay time for optimal voice transmission.
How to access and listen to VHF Weather Broadcast channels.
Steps to start recording audio received by the transceiver.
Information on automatic stopping and manual stopping of recording.
How to configure audio recording settings like bands and transmit audio inclusion.
How to play back recorded audio files from the transceiver's storage.
How to delete recorded audio files from the transceiver's storage.
Photography tips and how to adjust image settings like resolution and quality.
How to transfer images to other stations when using digital mode.
How to connect and use the camera microphone for taking pictures.
How to save captured images and transmit them to other transceivers.
How to use the WIRES-X system for expanded communication range.
How to use the APRS function for location reporting and messaging.
How to use Tone Squelch for selective audio reception based on CTCSS tones.
How to use Digital Code Squelch for selective reception based on DCS codes.
How to use the PAGER (EPCS) feature for station-specific calling.
How to use the Digital Personal ID feature for selective digital mode reception.
Step-by-step guide to accessing and navigating the Setup Menu.
Procedure for a full factory reset of all settings and memory.
Procedure to reset only the Setup Menu settings to defaults.
FCC compliance statements and warnings against unauthorized modifications.
Manufacturer's declaration regarding scanner receiver capabilities.
Prohibition against modifying the device to receive cellular signals.
EU Declaration of Conformity and important usage conditions for EU countries.
Information on proper disposal of electronic and electrical equipment.
To Next Page
