Yaesu FT5De - Setup Menu Options Reference (Part 6)

66
Setup Menu no. / item Description
Selectable options
(
Options in bold are the default settings )
22 BAND SELECT Set the frequency bands that can
be selected for A-band and B-band
(“OTHER” includes 50MHz band*,
VHF (1), VHF (2), UHF (1), UHF (2)*)
* A band only
AIR: ON / OFF
VHF: ON / OFF
UHF: ON / OFF
OTHER: ON / OFF
SW*: ON / OFF
AM*: ON / OFF
FM*: ON / OFF
*A-band only.
23 DIAL KNOB CHANGE Select a vibrator mode and set up the
vibrator function.
-
APRS
* For details of the functions, refer to the APRS Instruction Manual.
1 APRS AF DUAL Turn ON/OFF the muting function
when both the APRS function and AF
dual function are active.
ON / OFF
2 APRS DESTINATION Display the model code. APY05D (Uneditable)
3 APRS FILTER Select the filter function. Mic-E： ON / OFF
POSITION： ON / OFF
WEATHER： ON / OFF
OBJECT： ON / OFF
ITEM： ON / OFF
STATUS： ON / OFF
OTHER： ON / OFF
ALTNET： ON / OFF
4 APRS MODEM Set the APRS baud rate. OFF / 1200bps / 9600bps
5 APRS MSG FLASH Set the strobe to flash when there is
an incoming message.
MSG：
OFF / 2sec to 60sec / CONTINUOUS /
EVERY 2s to EVERY 10m 4sec
GRP：
OFF / 2sec to 60sec / CONTINUOUS
4sec
BLN：
OFF / 2sec to 60sec / CONTINUOUS
4sec
6 APRS MSG GROUP Group filtering for received messages. G1: ALLxxxxxx
G2： CQxxxxxxx
G3： QSTxxxxxx
G4： YAESUxxxx
G5： - - - - - - - - -
B1： BLNxxxxxx
B2： BLNx
B3： BLNx
7 APRS MSG TEXT Input the fixed text message. 1 to 8
8 APRS MUTE Set the B-band AF muting function
on/off when APRS is active.
ON / OFF
9 APRS POPUP Set the beacon type, message type
and time for pop-up display.
The setting values of Mic-E, POSITION,
WEATHER, OBJECT, ITEM, STATUS,
OTHER, MY PACKET, MSG, GRP and BLN
are as follows.
OFF / ALL2s to ALL60s / ALLCNT /
BND2s to BND60s / BNDCNT ALL10s
The setting values of MY MSG, DUP.BCN,
DUP.MSG, ACK.REJ and OTHER MSG are
as follows.：
OFF / BND2s to BND60s BND10s