Yakima HitchSki - HitchSki Installation; Assemble Frame and Rails; Tighten Frame and Load HitchSki

1033331B-2/12
ALIGN RAILS
TO HOLES IN
FRAMES.
INSERT TWO
CAP SCREWS
INTO EACH
RAIL.
ASSEMBLE THE FRAME.
• The pivoting rails should go on first with cam levers facing out.
• Next, the lower rails with adjustment wheels facing out.
TIGHTEN SCREWS
WITH HEX WRENCH.
ON YOUR BIKE CARRIER, MOVE
CRADLES TO ALIGN TO FRAME.
LOAD HITCHSKI WITH LEVERS
TOWARD YOU.
CAM
LEVER
CAM
LEVER
LOWER
RAIL
PIVOTING
RAIL
WARNING
"YAKIMA"