1033424C-3/15
Release brakes on rollers by
pulling and turning to the left.
Position boat hull on rear
rollers, and slide boat
onto vehicle.
You may need to loosen the attachments
and slide rollers inboard or outboard so
that rollers rest against the hull.
Install a second pair of Hully
Rollers, Mako or LandShark
Saddles on FRONT crossbar.
Holding the buckle end, pass a strap over the
boat, and under each crossbar.
Always pass the strap
inboard to the tower.
Insert end of plain
strap into buckle
as shown.
PULL STRAP
ENDS TO
TIGHTEN.
TIGHTEN STRAPS
SET THE
ROLLER
BRAKES:
Pull tab out and
to the right while
rocking boat
gently until the
brake tabs nest.
INSTALL STRAPS
To Next Page
Loading...
