Yakima LockNLoad Crossbar Clamps User Manual

Instruction #1035988A - Page 1 of 5
Crossbar Clamps, 2 Pack
LockNLoad
&217(176Ă&217(18Ă&217(1,'2
M6 nyloc nut (4X)
écrou nyloc M6 (x 4)
tuerca nyloc M6 (4X)
bracket (2X)
support (x 2)
soporte (2X)
clamp (2X)
mâchoire (x 2)
abrazadera (2X)
M6 washer (4X)
rondelle M6 (x 4)
arandela M6 (4X)
Pour le français, allez à la page 3. Para español ir a la página 3.
/2$'&$3$&,7<
2 Crossbars (4 Clamps) - up to 220lbs (100 kg)
3 Crossbars (6 Clamps) - up to 330lbs (150 kg)
4 Crossbars (8 Clamps) - up to 440lbs (200 kg)
OverHaul HD, OutPost HD, BedRock HD - 300 lbs (136 kg)
Note: Each 2 pack of adapters is for
one crossbar. Purchase additional sets
depending on the number of crossbars.
4mm hex or torque wrench
10mm box or spanner wrench
Go to yakimatech.com for your speciic vehicle load capacity
722/65(48,5('

Yakima LockNLoad Crossbar Clamps Specifications

General

Brand	Yakima
Model	LockNLoad Crossbar Clamps
Category	Automobile Accessories
Language	English

Summary

Tools Required

Load Capacity

Installation

Attach Mounting Blocks to Brackets

Secure mounting blocks to brackets using M6 capscrews. Tighten to 4 Nm with a 4mm wrench.

Attach Mounting Blocks to Crossbars

Position clamps on crossbars, guide bolts through bracket holes, and hand-tighten nuts to 2.5 Nm with a 10mm wrench.

Important Warnings

Rack Installation Safety

Ensure secure mounting to prevent accidents. Follow product and vehicle instructions.

Rack Loading Guidelines

Do not exceed maximum load limits. Distribute load uniformly with a low center of gravity.

Vehicle Driving and Regulations

Adjust speed to load and conditions. Vehicle handling changes with roof loads.

Maintenance and Care

Clean racks regularly, especially in winter. Remove when not in use. Inspect for damage.