28-13-011-Rev4 2/17
TRACK INSTALLATION
TRACK ORIENTATION
NOTE - image as viewed from rear of vehicle
TRACK SET-UP
It is recommended to completely install one track at a time.
M8 Button Head
Screws
Rivets
Isuzu D-Max SX
Vehicle Front
Holden Colorado / Isuzu D-Max LS, LS-U, LS-M
M8 Button Head
Screws
Rivets
NOTE - image as
viewed from above
Rectangular cut out at rear of vehicle
Vehicle Front
The foam tape
on side of Tracks
faces outside
of vehicle as
shown, with
rectangular cut
outs at rear
of vehicle.
Foam Tape
Foam Tape
BEFORE BEGINNING
INSTALLATION
Clean roof thoroughly
and allow to dry before
beginning installation.
1
2
3
NOTE - image as
viewed from above
Rectangular cut out at rear of vehicle
To Next Page
Loading...
