1034839B-3/18
Adjust box position, checking for
good alignment.
Always position box to avoid
interference with rear hatch or sunroof.
Tighten clamp
thumb wheels
until the levers
close with firm
resistance.
Slide clamps along tracks (inside box) to
engage crossbars.
Close levers to
engage clamps.
open
closed
TIGHTEN ALL
THUMB WHEELS.
• Check clamp opening for crossbar clearance.
• Loosen clamp thumb wheel if necessary.
On some vehicles,
hatch interference is
unavoidable. Use caution
when opening your hatch.
Open lid to gain access to levers.
To Next Page
