Yakima Tonneau Kit 1 User Manual

Instruction #1035982C - Page 1 of 6
$POUFOUTt$POUFOVt$POUFOJEP
"WBJMBCMFBDDFTTPSJFTt"DDFTTPJSFTEJTQPOJCMFTt"DDFTPSJPTEJTQPOJCMFT
Eye Bolts
#8001162
SideBar Short Bed
#8001153
Ladder Roller
#8001163
SideBar Long Bed
#8001154
HD Hook Straps
#8001165
Load Stop
#8001161
Rotopax Mounting Kit*
#8001167
Tonneau Kit 1
M8 acorn nut (6X)
écrous borgnes M8 (x 6)
tuercas ciegas M8 (6X)
M8x35 t-slot Bolt (8X)
boulon pour rainure en T M8 x 35 (x 8)
pernos con ranura en T M8x35 (8X)
base pad (4X)
plaques de base (x 4)
almohadillas de base (4X)
M13/19mm wrench (1X)
clé M13/19 mm (x 1)
llave M13/19 mm (1X)
locking pin (2X)
goupilles de verrouillage (x 2)
pasadores de jación (2X)
M8 at washer (8X)
rondelles plates M8 (x 8)
arandelas planas M8 (8X)
T15 Torx wrench (1X)
clé Torx T15 (x 1)
llave Torx T15 (1X)
$BQBDJUZt$BQBDJUÏt$BQBDJEBE $PNQBUJCJMJUZt$PNQBUJCJMJUÏt$PNQBUJCJMJEBE
Tonneau Kit 1 for Retrax XR
series tonneau covers
Trousse de caisse 1 pour les
couvre-caisses de série Retrax XR
Kit Tonneau 1 para cubrecajas
de la serie Retrax XR
300 lb (136 Kg) on-road
180 (82 Kg) off-road
800 lb (363 Kg) Static Load Limit
300 lb (227 kg) sur route, 180
lb (82 kg) hors route, limite de
charge statique de 800 lb (363 kg)
Límite de carga en carretera 300
lb (136 kg), en terracería 180 lb (82
kg), sin movimiento 800 lb (363 kg).
3PUPQBYNPVOUTPMETFQBSBUFMZ
-FTVQQPSU3PUPQBYTFWFOEËQBSU
&MNPOUBKF3PUPQBYTFWFOEFQPSTFQBSBEP

Yakima Tonneau Kit 1 Specifications

General

Includes	Mounting hardware
Material	Aluminum
Installation	Tool-free installation
Weather Resistance	Designed to withstand various weather conditions
Weight Capacity	300 lbs

Summary

Product Overview and Specifications

Contents List

Lists the components included in the Tonneau Kit 1.

Capacity Details

Details the weight capacity for on-road and off-road use.

Compatibility Information

Specifies the compatible tonneau covers for the kit.

Available Accessories

Lists optional accessories that can be purchased separately.

Installation Steps

Insert and Position T-Bolts

Insert t-bolts into the tonneau cover rails and position them.

Place Base Pads and Towers

Place base pads over t-bolts and towers over base pads.

Position Rack Bases

Measure and position the front and rear rack bases evenly.

Tighten Hardware

Tighten nuts and lock posts to specified torque.

Lock the System

Remove screws from lock housings to secure the system.

Attach Crossbars

Proceed to attach crossbars following separate instructions.

Important Safety Warnings

Rack Installation and Loading Precautions

Covers safe installation, securing loads, and driving precautions.

Maintenance and Part Replacement

Instructions for cleaning, maintenance, and using genuine parts.

Spanish Safety Warnings

Important safety and usage warnings in Spanish.