15
P/N -110- - - Rev DAYRD STANDALONE INST FUL
Resetting Lock to Factory Default
When lock is reset to factory defaults all user
codes (including the Master code*) arePIN
deleted and all programming features are reset to
original default settings (see "Factory Default
Settings").
1. Remove the battery cover.
2. Remove the batteries.
3. While pressing the reset button (minimum of 3
seconds) reinstall batteries. Release reset
button.
4. Replace battery cover.
Upon reset, Master Code creation is the only
option available and must be performed prior to
any other programming of the lock.
NOTE: After setting the Master Code, press any
key to complete handing of the lock.
To Next Page
Loading...
Need help?
General
