Yale Essential YDME-50

4
Essential Series Essential Series
Press “3”
“*”
Master Code
“#”
“#”
2.5 Deleting All Code User
Press “5”
“#”
Master Code
3digit User ID
2.6 Enrolling DIY Card User
“#”
Press “5”
“#”
Master Code
3digit User ID
2.7 Deleting DIY Card with User ID
Ex a m pl e
5
YDME - 50 YDME - 50
Operation Instruction
2.8 Deleting All DIY Card User
Note: # can not be used to create a user ID. A user ID is a random 3-digit number. A code user ID
can be same as a card uer ID.
Press “6”
“#”
Master Code
“#”
2.9 Enabling/ Disabling Passage Mode
Press “*”
“*”
Master Code
“#”
2.10. Reset
Connect the power wire on the front lock body with the batteries. Keep pressing
the RESETbutton on the rear metal plate of the front lock body with a small stick
for seconds and press any key to wake up the lock. Operation succeeds after hearing
a and all its memory is cleared
.
2.11 Change the Batteries
Loosen the copper loop with
the wrench and remove the
back cover.
Replace the old batteries
with new one.
Fix the back cover and
tighten the copper loop with
the wrench.