Proc_Cal_003: Save and Exit
WHEN TO PERFORM
Must be performed after any calibration except Proce-
dure 016, Transmission Valve Calibration.
WHY PERFORM
Calibration processes do not automatically save their
results until this routine is run.
HOW TO PERFORM
WARNING
Keep yourself and all others clear of the lift mech-
anism. Never allow anyone under or on the forks.
Never put hands, arms, head, or legs through the
mast or near the carriage or lift chains. This warn-
ing applies not only to the operator but also the
helper. A helper must not be near the load or the
lift mechanism while the operator is attempting to
handle a load. The lift mechanism has moving
parts with close clearances that can cause seri-
ous injury.
Refer to Table 5 for the procedures on how to perform
Proc_Cal_003: Save and Exit.
Proc_Cal_003: Save and Exit 8000 YRM 1134
8 Confidential/Proprietary - Do Not Copy or Duplicate
To Next Page
Loading...