Door/window contact
1 Remove the cover by loosening the fixing screw.
2 Insert the two AAA batteries as shown.
The indicator will flash briefly.
7
Flood detector
Unscrew the two screws and insert 12V battery.
Note: The detector will not respond to inserting the
battery until the learning in procedure is completed.
T
o test the detector is working simply bridge the water
sensor pr
obes with a coin, an inter
nal sir
en will sound.
Tamper
switch
Jumper switch
Learn/Test button
Tamper
switch
Jumper
switch
Extension ter
minals
Magnet
Lear
n/T
est
button
LED
Smoke detector
Twist off the back and insert the 4 AAA batteries
as shown.
Please note that the
LED will flash and can
take up to 11 minutes
to self calibrate.
PIR movement detector
Remove the fixing screw and cover assembly and
insert the three AA batteries as shown.
¥ The light steadily flashes for 30 seconds while
components initialise.
Lear
n/test button
Scr
ew fixing knockouts x 2
Learn/Test
button
Lid
Base
To Next Page
Loading...
Need help?
General
