¹ Even though the lock accepts value 0x01 for Auto Relock Time, we limit the lock’s minimum to value of 0x03. Therefore, if user tries to set
Auto Relock Time to values 0x01 or 0x02, it will always report back value of 0x03.
² When Operation Mode feature is set to Passage Mode, this also results in disabling the following configuration parameters 2 (Auto Relock
feature). The Passage Mode feature can only be set when user holds the inside button.
³ This requires additional Hardware and calibration within the Yale Access App.
⁴ The Door Propped value is represented as seconds X 10. (i.e., a value of 4 would mean a door propped timer of 40 seconds).
To Next Page
Loading...
