Yamaha 115A - Adjusting Idling Speed

4-15
E
EMK54110
ADJUSTING IDLING SPEED
w
8 Do not touch or remove electrical
parts when starting or during opera-
tion.
8 Keep hands, hair and clothes away
from flywheel and other rotating parts
while engine is running.
cC
This procedure must be performed while
the outboard motor is in the water. A
flushing attachment or test tank can be
used.
4) Reinstall the filter element in the cup.
Make sure the O-ring in position in
the cup. Firmly screw the cup onto
the filter housing.
5) Attach the filter assembly to the
bracket with that the fuel hoses are
attached to the filter assembly.
6) Run the engine and check the filter
and lines for leaks.
1 Filter element
2 O-ring
3 Filter cap
4 Filter housing
207031
207013
q
w
e
r
64C-9-16-4 4/18/01 11:41 AM Page 84