Need help?Do you have a question about the Yamaha 2007 FZ6-NA and is the answer not in the manual?
General| Engine Type | Liquid-cooled, 4-stroke, DOHC, inline 4-cylinder |
|---|---|
| Displacement | 600 cc |
| Bore x Stroke | 65.5 mm x 44.5 mm |
| Compression Ratio | 12.2:1 |
| Fuel System | Electronic Fuel Injection |
| Transmission | 6-speed |
| Final Drive | Chain |
| Front Tire | 120/70 ZR17 |
| Rear Tire | 180/55 ZR17 |
| Seat Height | 795 mm |
| Wheelbase | 1, 440 mm |
| Power | 98 hp |
| Ignition | Digital |
| Front Suspension | Telescopic fork |
| Rear Suspension | Swingarm |
| Front Brakes | Dual discs, 298 mm |
| Rear Brakes | Single disc |
Details for identifying the vehicle's VIN and model.
Overview of the motorcycle's main systems like FI and ABS.
List of required special tools for maintenance and assembly.
Basic dimensions, weight, and load capacity of the motorcycle.
Detailed technical data for the engine components and performance.
Technical data for the frame, wheels, tires, brakes, and suspension.
Technical data for electrical components like battery, lights, and ECU.
Specifications for fastener tightening in Nm, m·kg, and ft·lb.
Recommended service intervals and checks based on mileage or time.
Procedures for engine checks, adjustments, and maintenance tasks.
Procedures for chassis components like brakes, wheels, steering, and suspension.
Procedures for electrical system checks and adjustments, including lights.
Basic procedures for removing common chassis parts like seat and cowlings.
Procedures for removing, checking, and installing the front wheel and related components.
Procedures for removing, checking, and installing the rear wheel and related components.
Detailed procedures for inspecting, servicing, and replacing front brake components.
Detailed procedures for inspecting, servicing, and replacing rear brake components.
Information on ABS system components, maintenance, and troubleshooting.
Procedures for disassembling, checking, and assembling the front fork legs.
Procedures for removing, checking, and installing the steering head components.
Step-by-step guide for removing the engine from the vehicle.
Procedures for removing, checking, and installing camshafts and related parts.
Procedures for removing, checking, and installing the cylinder head assembly.
Procedures for removing, checking, and installing valves and springs.
Procedures for removing, checking, and installing clutch components.
Procedures for removing, checking, and installing the crankshaft and connecting rods.
Procedures for checking and installing the radiator assembly.
Procedures for checking and installing the oil cooler assembly.
Procedures for checking and installing the thermostat assembly.
Procedures for disassembling, checking, assembling, and installing the water pump.
Procedures for removing and installing the fuel tank and fuel pump.
Procedures for checking injectors, throttle bodies, fuel pressure, and TPS.
Procedures for checking and installing the air induction system components.
Circuit diagram and troubleshooting for the ignition system.
Circuit diagram and troubleshooting for the electric starting system.
Circuit diagram and troubleshooting for the charging system.
Circuit diagram and troubleshooting for the lighting system.
Circuit diagram, ECU diagnostics, fail-safe, and troubleshooting for the FI system.
Immobilizer system overview, part replacement, and troubleshooting.
ABS system overview, component chart, circuit diagram, and troubleshooting.
Checks for various electrical components like switches, bulbs, fuses, and relays.
Troubleshooting guide for engine starting problems.
Troubleshooting steps for improper engine idling speed.
Troubleshooting for performance issues at higher speeds.
Troubleshooting for issues related to gear shifting.
Troubleshooting steps for engine overheating problems.
Troubleshooting guide for ineffective braking.
Troubleshooting guide for handling instability issues.
Troubleshooting guide related to the ABS warning light status.
To Next Page
