2-6
GB
000654
q
502012
EMU00065
Throttle Control Grip
The throttle control grip is on the tiller handle.
Turn the grip counterclockwise to increase
speed and clockwise to decrease
EMU00067
Throttle Indicator
The fuel consumption curve on the throttle
indicator shows the relative amount of fuel
consumed for each throttle position. Choose
the setting that offers the best performance
and fuel economy for the desired operation.
1 Throttle indicator
EMU01293
Throttle friction adjusting screw/ knob
A friction device in the tiller handle provide
resistance to movement of the throttle grip.
This is adjustable for operator preference. An
adjusting screw/knob is located within the
tiller handle.
When constant speed is desired, tighten the
adjusting screw/bolt to maintain the desired
throttle setting.
w
Do not over tighten the friction adjusting
screw/ knob.
If there is too much resistance, it may be
difficult to move the throttle grip, which
could result in an accident.
Resistance Knob/Screw
Increase Turn clockwise
Decrease Turn counterclockwise
69R-9-71 (GB,F,ES) 2 3/23/02 2:31 PM Page 14
To Next Page
