Yamaha 2D - Maintenance Chart 2; Greasing Procedures

Maintenance
37
EMU34452
Maintenance chart 2
Spark plug caps/spark
plug wires
Inspection or replace-
ment as necessary
Water from the cooling
water pilot hole
Inspection
Throttle link/throttle
cable/throttle pick-up
timing
Inspection, adjust-
ment or replacement
as necessary
Cooling water inlet Inspection
Main switch/stop
switch/choke switch
Inspection or replace-
ment as necessary
Wire harness connec-
tions/wire coupler con-
nections
Inspection or replace-
ment as necessary
Fuel tank (built-in tank)
Inspection and clean-
ing as necessary
Item Actions
Every
1000 hours
Exhaust guide/ex-
haust manifold
Inspection or replace-
ment as necessary
Item Actions
Initial Every
20 hours
(3 months)
100 hours
(1 year)
300 hours
(3 years)
500 hours
(5 years)
U6GD22E0.book Page 37 Friday, January 13, 2023 10:22 AM