3-28
GB
EMG63010
PROCEDURE FOR TILTING UP
Manual tilt model
1) Remove the fuel-line connection from
the motor. (If the fuel connector is
provided on the motor.)
2) Place the tilt-lock lever in Release.
EMG63110
PROCEDURE FOR TILTING UP
Hydro-tilt model
1) Remove the fuel-line connection from
the motor.
2) Place the tilt-lock lever in the release
position.
403024
402011*
3) Hold the rear of the top cowling with
one hand, tilt the engine up, and turn
the tilt-support lever to the locked
position and support the engine.
w
Leaking fuel is a fire hazard. Disconnect
the fuel line if the engine will be tilted for
more than a few minutes. Otherwise, fuel
may leak. (If the fuel connector is provid-
ed on the motor.)
63B-9-78-A0-3b 2/17/03 4:57 PM Page 26
To Next Page
