Reattaching the stand for this product
Follow the important precautions below to prevent damage to your device or personal injury.
CAUTION
(
Do not attach or remove this product on or from an unstable surface.
(
Be sure to unplug all cables from this product before attaching.
(
Make sure to support this product with your hand while loosening or tightening the screws before attachment or removal.
When removing this product from the mic stand or desk-mounted microphone boom arm and attaching it
again to the stand, follow the steps for “How to attach”(p.61) in reverse order.
When attaching the spacers onto this unit, make sure to line them up with the holes on this unit and attach
them firmly.
64
Attaching this product onto a mic stand or desk-mounted microphone boom arm > Reattaching the stand for
this product
To Next Page
Loading...
