What to do if my Yamaha Home Theater System remote control doesn’t work?
If the remote control for your Yamaha Home Theater System isn't working, try these steps: 1. Replace the batteries. 2. Ensure you're within a 6-meter range and 60° radius of the unit. 3. Adjust the position of the main unit if direct sunlight or strong lighting is interfering with the remote control sensor.
What to do if my Yamaha Home Theater System TV functions strangely when using the remote control?
If your TV functions strangely when using the remote control for your Yamaha Home Theater System, the remote control might be interfering with the TV's remote control sensor. Relocate this unit away from the TV or cover the TV’s remote control sensor.
What to do if my Yamaha Home Theater System has no power?
If your Yamaha Home Theater System isn't powering on, make sure the AC supply lead is properly plugged into the outlet.
Why is there no sound (or no picture) from an external unit connected to my Yamaha Home Theater System?
If you're not getting sound or a picture from a device connected to your Yamaha Home Theater System, check the following: * Ensure the cords are connected properly; if the problem continues, the cords may be defective. * Verify that you've selected the correct input source.
Why is there no sound from the rear speakers of my Yamaha Home Theater System?
If you aren't hearing sound from the rear speakers of your Yamaha Home Theater System, consider these possible causes: * A loose or bad rear speaker connection. Connect it properly. * The sound output level to the rear speakers is set to minimum. Raise the sound output level. * No DSP program is selected. Select the appropriate program.
Why is there no sound from the center speaker of my Yamaha Home Theater System?
If you're not hearing sound from the center speaker of your Yamaha Home Theater System, check if the sound output level to the center speaker is set to minimum. If so, raise the sound output level to the center speaker. Also, make sure that the appropriate DSP program is selected.
What to do if my Yamaha Home Theater System is affected by strong external noise?
If your Yamaha Home Theater System is malfunctioning due to external noise, put the system into standby mode and disconnect the AC power cord from the AC outlet. After about 30 seconds, reconnect the power and operate the system again.
Why is there excessive static in FM broadcasts on my Yamaha Home Theater System?
Excessive static in FM broadcasts on your Yamaha Home Theater System can be caused by interference from a starting motor of a nearby car. To solve this problem, position the FM antenna as high and as far away from nearby roads as possible. Connect using a coaxial cable.
Why do stereo broadcasts sound noisy on my Yamaha Home Theater System?
If stereo broadcasts are noisy on your Yamaha Home Theater System, check the antenna connections. If the antenna input is too weak due to obstructions or excessive distance from the broadcasting station, install a multi-element type FM antenna if possible.
Why are stereo broadcasts noisy and the ST indicator blinks on and off on my Yamaha Home Theater System?
If stereo broadcasts are noisy and the ST indicator blinks on and off on your Yamaha Home Theater System, the antenna input may be insufficient. Install an antenna appropriate for the electric field strength of your area.
General| Weight | Not specified in available documentation. |
|---|---|
| Audio Formats Supported | Dolby Digital, DTS |
| Wireless Connectivity | No |
| Dimensions (W x H x D) | 435 x 161 x 315 mm |
| Type | Home Theater System |
| Dimensions | 435 x 161 x 315 mm |
To Next Page
