3. Open the coolant reservoir cover.
1. Coolant reservoir cover
2. Coolant reservoir cap
4. Remove the coolant reservoir cap, and
then add coolant or distilled water to raise
it to the specified level.
5. Install the coolant reservoir cap.
6. Close the coolant reservoir cover.
7. Install the seat.
cC
Hard water or salt water is harmful to the
engine. You may use soft water if you can’t
get distilled water.
NOTE:
8 If water is added, have a Yamaha dealer
check the antifreeze content of the coolant
as soon as possible.
8 If your ATV overheats, see page 8-48 for
details.
Coolant reservoir capacity:
0.28 L (0.25 Imp qt, 0.30 US qt)
8-9
5FK-9-17-03 10/3/04 9:36 PM Page 10
To Next Page
Loading...
Need help?
General
