Yamaha BWS 2003 - Adjusting the Shock Absorber Assembly

3
INSTRUMENT AND CONTROL FUNCTIONS
3-9
EC000010
Keep the following points in mind
when using the storage
compartment.
•
Since the storage compartment
accumulates heat when
exposed to the sun, do not
store anything susceptible to
heat inside it.
•
To avoid humidity from
spreading through the storage
compartment, wrap wet articles
in a plastic bag before storing
them in the compartment.
•
Since the storage compartment
may get wet while the scooter
is being washed, wrap any arti-
cles stored in the compartment
in a plastic bag.
•
Do not keep anything valuable
or breakable in the storage
compartment.
To store a helmet in the storage
compartment, place the helmet with the
front facing backward.
NOTE :
•
Some helmets cannot be stored
in the storage compartment
because of their size or shape.
•
Do not leave your scooter
unattended with the seat open.
EAU00295
Adjusting the shock absor-
ber assembly
This shock absorber assembly is
equipped with a spring preload
adjusting ring.
EC000015
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.