Yamaha C-5000 - General Specifications

34
General specications
Total harmonic distortion plus noise
(JEITA, input 0.5V, 20 Hz to 20 kHz)
BAL 1/BAL 2/TUNER/CD/LINE 1/LINE 2 IN →
BAL/LINE 1/LINE 2 .................0.0100%
PHONO (MC) → LINE 2 OUT (recording)
.................................0.0200%
PHONO (MM) → LINE 2 OUT (recording)
.................................0.0200%
Channel separation
(Input 1.0 k terminated, 1 kHz/10 kHz, JEITA)
BAL 1/BAL 2/TUNER/CD/LINE 1/LINE 2 IN
...........................110 dB or higher
PHONO (MC) ..................80 dB or higher
PHONO (MM) .................98 dB or higher
Function separation
(IHF-A network, input 1.0 k terminated, JEITA)
BAL 1/BAL 2/TUNER/CD/LINE 1/LINE 2 IN
...........................110 dB or higher
PHONO (MC) ..................75 dB or higher
PHONO (MM) .................95 dB or higher
Signal to noise ratio
(IHF-A network, input 1.0 k terminated, JEITA)
BAL 1/BAL 2/TUNER/CD/LINE 1/LINE 2 IN
...........................110 dB or higher
PHONO (MC 300Ω) .............80 dB or higher
PHONO (MM) .................98 dB or higher
Residual noise (IHF-A network)
BAL/LINE 1/LINE 2 .................... 3 μV
Tone control characteristics
Bass
Boost/cut ...................... 30 Hz/±9 dB
Turnover frequency ...................350 Hz
Treble
Boost/cut ..................... 20 kHz/±9 dB
Turnover frequency ..................3.5 kHz
Rated output voltage/output impedance
(Input 200 mV, 20 Hz to 20 kHz, THD 0.01%)
BAL (BYPASS) .................. 2 Vrms/150Ω
BAL (ATT. −6dB) ................ 1 Vrms/150Ω
LINE 1/LINE 2 .................. 1 Vrms/150Ω
LINE 2 OUT (recording) .......200 mVrms/1.2 kΩ
Maximum output voltage (1 kHz, THD 0.05%)
BAL ................................ 6 Vrms
LINE 1/LINE 2 ....................... 3 Vrms
LINE 2 OUT (recording) ................ 3 Vrms
Input sensitivity/input impedance
BAL/LINE 1/LINE 2, 1 V
BAL 1/BAL 2 .............. 200 mVrms/52 kΩ
TUNER/CD/LINE 1/LINE 2 IN
....................... 200 mVrms/47 kΩ
EXT.IN .......................1 Vrms/20 kΩ
LINE 2 OUT (recording) (150 mV, 1 kHz)
PHONO (MC 300Ω) ......... 100 μVrms/300Ω
PHONO (MC 100Ω) ......... 100 μVrms/100Ω
PHONO (MC 30Ω) ........... 100 μVrms/30Ω
PHONO (MC 10Ω) ........... 100 μVrms/10Ω
PHONO (MM, XLR-type) .....2.5 mVrms/52 kΩ
PHONO (MM, RCA-type) ....2.5 mVrms/47 kΩ
Maximum input signal voltage
LINE 2 OUT (recording) (1 kHz, THD 0.05%)
BAL (BYPASS) ......................2.8 Vrms
BAL (ATT. −6dB) ....................5.6 Vrms
TUNER/CD/LINE 1/LINE 2 IN .........2.8 Vrms
PHONO (MC) .......................2 mVrms
PHONO (MM) .....................50 mVrms
EXT.IN ............................5.6 Vrms
Frequency response (JEITA, load 22 k)
10 Hz to 100 kHz ....................+0/−3 dB
20 Hz to 20 kHz ...................+0/−0.3 dB