Yamaha CD-S303 Update Guide

CD-S303RK
CD-S303
Update Guide
Manual Development Group
© 2021 Yamaha Corporation
Published 10/2021
IPOD-A0
VFQ0270
Compact Disc Player
1
Follow the steps below to update the firmware of the unit.
Checking the firmware version of the unit
1
Turn on the unit.
2
If the USB indicator on the front panel is lit, press CD/USB to switch
to Disc mode.
If a CD has been placed on the disc tray, remove it.
3
Press and hold A/B on the remote control.
The current firmware version appears on the information display of the front panel
for about five seconds. Write down the version number.
Downloading the firmware
1
Have the following items ready.
• USB flash drive: Use a USB flash drive that meets all of the following
requirements.
– Supports the USB mass storage device class
– Formatted in FAT16 or FAT32 format
– No encryption applied
– No data stored on the device (empty)
• Computer that can be connected to the Internet
2
Download the firmware.
Check the version number of the latest firmware uploaded on the product pages of
Yamaha website. Download the firmware to update only if it is newer than that of
the unit.
3
Save the firmware data file to the USB flash drive.
Decompress the downloaded file and save the firmware data file in a folder at the
highest level of hierarchy (i.e., the root folder) of the USB flash drive.
Note
• Do not change the file name when saving the firmware data file to the USB flash drive.
Updating the firmware

Yamaha CD-S303 Specifications

General

Frequency range	2 - 20000 Hz
Audio formats supported	MP3, WMA
Signal-to-Noise Ratio (SNR)	105 dB
Total Harmonic Distortion (THD)	0.003 %
CD-R playback	Yes
Playback disc formats	CD audio
CD changer	No
Device type	HiFi CD player
Product color	Black
Disc loading type	Tray
Number of optical discs	1 discs
USB 2.0 ports quantity	1

Weight and Dimensions

Depth	260 mm
Width	435 mm
Height	86 mm
Weight	3500 g