To Next PageTo Next PageWhy is there distortion on my Yamaha CD-NT670 even with a good antenna?
If there is distortion and clear reception cannot be obtained even with a good FM antenna or an outdoor antenna on your Yamaha CD Player, multipath reflection or other radio interference may have occurred. Change the height, direction, or placement of the antenna.
What to do if my Yamaha CD-NT670 goes into standby mode immediately?
If your Yamaha CD Player enters standby mode shortly after being turned on or isn't operating correctly, ensure the power cable is securely connected. If the problem persists, the unit might have experienced a strong electric shock. Try initializing and rebooting the unit by holding down the A button on the front panel for more than 10 seconds. If that doesn't work, unplug the power cable from the wall outlet, wait for at least 30 seconds, and then plug it back in.
Why is my Yamaha CD-NT670 remote not working?
If the Yamaha CD Player's remote control isn't working, try these steps: * Ensure you're within the remote's operational range. * Check for direct sunlight or strong lighting affecting the unit's sensor; adjust lighting or the unit's position. * Replace the remote's batteries with new ones. * Remove any obstacles between the remote and the unit's sensor.
Why is there no sound coming from my Yamaha CD Player?
If you're getting no sound from your Yamaha CD Player, check the audio cable connection to your amplifier and ensure it's firmly connected. If the problem continues, try using a different audio cable. Also, verify that the input setting on your amplifier is correctly set to the input from the CD player.
What does 'Access Denied' mean on my Yamaha CD Player?
Access to the PC is denied. Configure the sharing settings and select the unit as a device to which music contents are shared.
Why can't I tune into DAB stations on my Yamaha CD-NT670?
If you cannot tune into any DAB stations on your Yamaha CD Player, perform the initial scan operations.
Why does playback not start immediately on my Yamaha CD-NT670?
If playback doesn't start immediately or stops quickly after pressing play on your Yamaha CD Player, the disc may be dirty. Wipe the disc clean. Also, ensure the disc is supported by the unit. If the unit was moved from a cold to warm place, condensation may have formed on the disc reading lens. Wait for an hour or two until the unit adjusts to the room temperature, and try again.
Why doesn't my Yamaha CD-NT670 CD Player detect the USB device?
If your Yamaha CD Player doesn't detect the USB device, turn off the unit, reconnect your USB device, and turn the unit on again. Also, make sure that you are using a USB device with FAT16 or FAT32 format.
Why Yamaha CD-NT670 CD Player does not detect the PC?
If your Yamaha CD Player isn't detecting your PC, ensure that the media sharing setting is correctly configured and that the unit is selected as a device to which music contents are shared. Also, check the settings of any security software on your PC that might be blocking the unit's access. Finally, verify that the unit and PC are on the same network by checking network connections and router settings.
Why does my Yamaha CD-NT670 CD Player enter standby mode immediately?
If your Yamaha CD Player enters standby mode soon after being turned on, ensure the power cable is firmly connected. If the issue persists, the unit may have experienced a strong electric shock. Try holding down A on the front panel for more than 10 seconds to initialize and reboot the unit. If the problem continues, unplug the power cable from the wall outlet, wait for at least 30 seconds, and then plug it back in.
General| Device type | HiFi CD player |
|---|---|
| MP3 playback | - |
| Product color | Black |
| Disc types supported | CD, CD-R, CD-RW |
| Preset stations quantity | 30 |
| AC adapter included | Yes |
| Power consumption (typical) | 16 W |
| Frequency range | 2 - 20000 Hz |
| Audio formats supported | AIFF, ALAC, FLAC, MP3, WMA |
| Signal-to-Noise Ratio (SNR) | 110 dB |
| Total Harmonic Distortion (THD) | 0.05 % |
| Bluetooth range | 10 m |
| Bluetooth version | 2.1+EDR |
| Bluetooth profiles | A2DP, AVRCP |
| USB 2.0 ports quantity | 1 |
| Supported radio bands | FM |
Weight and Dimensions| Depth | 338 mm |
|---|---|
| Width | 314 mm |
| Height | 70 mm |
| Weight | 2900 g |
Lists all items included in the product package for setup and operation.
Explains manual conventions, symbols, and references for clarity.
Identifies and describes the controls and indicators on the front panel.
Details the various input and output jacks on the rear panel.
Explains the function of each indicator on the front panel display.
Identifies and describes the buttons on the included remote control.
Instructions for connecting the unit to an amplifier or speakers.
Guide for connecting the supplied FM/DAB antenna for radio reception.
Steps to turn on the unit and configure eco standby mode.
Introduces methods for connecting the unit to a network.
Steps for connecting the unit to a network via a LAN cable.
Instructions for connecting the unit wirelessly to a network.
Guide for establishing a direct wireless link with a mobile device.
How to play audio CDs and data CDs containing music files.
Instructions for playing music files stored on USB devices.
Steps for playing music files from a PC or NAS via the network.
Guide for wireless audio streaming from Bluetooth-enabled devices.
How to connect and play audio from external devices like DVD players.
Instructions for tuning into DAB and DAB+ radio stations.
Guide for tuning into FM radio stations and using RDS.
How to access and play stations via the internet radio service.
Instructions for playing music from iPod/iTunes via AirPlay.
How to enable shuffle and repeat playback modes for music.
Shows how to view song title, time, and other playback information.
How to save and select network content for quick access.
Guide to register and play content using FAVORITES buttons.
How to set the unit to automatically enter standby mode.
How to access and change various unit settings through the option menu.
Instructions for updating the unit's firmware via network or USB.
Solutions for common problems like power, sound, or remote control issues.
Troubleshooting network features, connection problems, and PC detection.
Solutions for pairing and playback issues with Bluetooth devices.
Troubleshooting problems related to CD playback and disc compatibility.
Solutions for problems with USB device detection, format, and playback.
Troubleshooting DAB signal reception and station information display.
Solutions for noisy FM stereo, automatic tuning, and preset selection problems.
Explains common messages shown on the front panel and their solutions.
Lists compatible PCs, NAS, USB devices, and disc types.
Details the audio file formats supported by the unit.
