EasyManuals Logo

Yamaha CD-NT670 User Manual

Yamaha CD-NT670
475 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
En 11
English
Configuring network connection
Select a method of connecting to the network. You can play back music files stored on your PC, mobile devices, DLNA
*
-compatible NAS, or audio contents on the
Internet, by connecting this unit to the network. You can also operate the unit with your mobile device.
* Digital Living Network Alliance
Selecting connection
method
You can set the network connection by using the free
dedicated "MusicCast CONTROLLER" app installed to your
mobile device.
See “MusicCast Setup Guide” for details.
With MusicCast CONTROLLER, you can use the following
functions in addition to the network setting.
Play songs stored on computers (servers)
Select an Internet radio station
Distribute and receive audio between the unit and
other Yamaha MusicCast devices
You can also connect to the network by using the
following methods beside using “MusicCast
CONTROLLER”.
Connecting to wired network
Setting wired network connection
(& P.14).
Connecting to wireless network
Setting wireless network connection
(& P.16).
Connecting by Wireless Direct
Setting the wireless direct connection with
mobile device (& P.19).
Using “MusicCast CONTROLLER” to
make connection
Establishing connection by the unit
operation
It is recommended to use wired connection to
keep a stable connection.
For details on Internet connection, refer to the
owner’s manuals of your network devices.
If you are using a router that supports DHCP, you
do not need to configure any network settings for
the unit. If you are using a router that does not
support DHCP, configure the network setting from
[Network Config] in the option setting (& P.43).
Some security software installed on your PC or the
firewall settings of network devices (such as a
router) may block the access of the unit to the
network devices or the Internet. In this case,
change the setting of the security software or
network devices.
When setting the subnet manually, each server
must be connected to the same subnet as the unit
(& P.44).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha CD-NT670 and is the answer not in the manual?

Yamaha CD-NT670 Specifications

General IconGeneral
Device typeHiFi CD player
MP3 playback-
Product colorBlack
Disc types supportedCD, CD-R, CD-RW
Preset stations quantity30
AC adapter includedYes
Power consumption (typical)16 W
Frequency range2 - 20000 Hz
Audio formats supportedAIFF, ALAC, FLAC, MP3, WMA
Signal-to-Noise Ratio (SNR)110 dB
Total Harmonic Distortion (THD)0.05 %
Bluetooth range10 m
Bluetooth version2.1+EDR
Bluetooth profilesA2DP, AVRCP
USB 2.0 ports quantity1
Supported radio bandsFM
Weight and Dimensions IconWeight and Dimensions
Depth338 mm
Width314 mm
Height70 mm
Weight2900 g

Related product manuals