Why does my Yamaha CD-S303BL CD Player not start playback correctly?
If playback does not start immediately or from the correct point on your Yamaha CD Player, the disc might be dirty or scratched. Wipe off the dirt from the disc surface, or use an unscratched disc.
How to fix sound skipping on Yamaha CD Player?
If the sound skips on your Yamaha CD Player, the unit may be affected by vibration or impact; try changing its location. Alternatively, the disc might be dirty or scratched; try cleaning it or using an unscratched disc.
What to do if the disc tray on my Yamaha CD-S303BL CD Player won't close?
If the disc tray on your Yamaha CD Player does not close completely, there may be a foreign object inside the disc tray enclosure. Check the disc tray and remove any foreign object.
Why is my Yamaha CD-S303BL unable to play the inserted disc?
If your Yamaha CD Player won't play a disc, there might be several reasons. First, the disc could be dirty or scratched; try cleaning it or using a different disc. Ensure the disc is placed with the label side up. Condensation inside the unit can also prevent playback; try turning the unit on and waiting 20-30 minutes before trying again. The unit might be in USB mode, so press CD/USB to switch to Disc mode. Also, confirm that the disc and its file format are supported by the unit.
What to do if Yamaha CD-S303BL remote control does not work?
If the remote control for your Yamaha CD Player isn't working correctly, the batteries may be weak; try replacing them. Also, make sure you are within the operative range and angle for the remote to function properly.
How to fix a Yamaha CD-S303BL that does not turn on?
If your Yamaha CD Player does not turn on when you press the power switch, the power cord may not be properly plugged in. Connect the power cord firmly to the AC outlet.
Why can't I play a music file on my Yamaha CD-S303BL CD Player from a USB drive?
If your Yamaha CD Player is unable to play a music file from the USB flash drive: * Ensure the USB flash drive is properly connected to the unit. * Use a USB flash drive that contains files in a format supported by the unit. * If the unit is in Disc mode, press CD/USB to switch to USB mode.
Why does the sound skip when playing a CD on my Yamaha CD Player?
If the sound skips on your Yamaha CD Player, the issue might be due to vibration or impact affecting the unit. Try changing the location of the unit. Alternatively, the disc could be dirty or scratched. In this case, wipe the disc surface or use an unscratched disc.
What to do if audio is not output from the device connected to the DIGITAL OUT jacks of Yamaha CD-S303BL?
If audio is not output from the device connected to the DIGITAL OUT jacks, the PURE DIRECT function may be turned on. Turn the PURE DIRECT function off.
Why does my Yamaha CD-S303BL have no indication on the display?
If there is no indication on the display, the PURE DIRECT function might be turned on. Turn the PURE DIRECT function off.
General| Type | CD Player |
|---|---|
| Disc Compatibility | CD, CD-R, CD-RW |
| Frequency Response | 2 Hz - 20 kHz |
| Signal-to-Noise Ratio | 110 dB |
| Dynamic Range | 100 dB |
| Power Consumption | 15 W |
| Output Level/Voltage | 2.0V RMS |
| Digital Audio Output | Optical |
| Dimensions (W x H x D) | 435 x 106 x 320 mm |
| DAC | Burr-Brown |
| Total Harmonic Distortion | 0.003% (1 kHz) |
To Next Page
