Need help?Do you have a question about the Yamaha CDC-675 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Playback Formats | CD, CD-R, CD-RW |
| Output | Analog, Digital |
| Digital Output | Coaxial, Optical |
| Remote Control | Yes |
| Frequency Response | 2 Hz - 20 kHz |
| Dynamic Range | 100 dB |
| Signal-to-Noise Ratio | 110 dB |
| Output Voltage | 2 V |
| Channels | 2 |
| Output Level | 2 V |
| Power Consumption | 15 W |
| Channel Separation | 90 dB |
| Disc Capacity | 5 Discs |
| Digital-to-Analog Converter | 24-bit/192kHz |
| DAC | 24-bit/192kHz |
Details important components and replacement part specifications.
Procedure for verifying insulation after service on 120V models.
Safety instructions for servicing laser components.
Technical specifications for the CDC-575/CDC-505 model.
Technical specifications for the CDC-675/CDC-905 model.
Instructions on how to activate the test mode.
Lists all error codes and their corresponding descriptions.
Provides guidance for troubleshooting specific error codes.
Diagnosing and resolving tray loading/unloading problems.
Troubleshooting no sound or intermittent sound issues.
Diagnosing when the unit acts as if no disc is loaded.
Resolving problems with audio skipping during playback.
Troubleshooting when the search function does not work.
Pin functions and specifications for the µPD78P078GF-3BA IC.
Detailed information on the MN35511 signal processor.
Detailed pin functions for the MN35511 IC.
Further pin functions for various ICs.
Block diagrams for servo, driver, and display ICs.
Comprehensive list of electrical components and their part numbers.
Detailed list of components for the main PCB.
Continues listing diodes, ICs, transistors, and switches.
To Next Page
