Yamaha CinemaStation TSS-15

Questions and Answers

I
ivan91Aug 19, 2025
How to fix a Yamaha Home Cinema remote control that is not working?
- P
  Phillip AdkinsAug 19, 2025
  If your Yamaha Home Cinema remote control isn’t working, it might be due to a depleted battery. Replace it with a new CR2025 battery. Here’s how: 1. Using a small screwdriver, carefully slide out the battery holder. 2. Remove the expired battery, and place the new battery onto the battery holder with the + side facing up. 3. Slide the battery holder into the remote control, and push it so that it clicks shut. Also, make sure you’re within the remote control's maximum working range of 6 meters (20 feet), and within a working angle of 30 degrees. Reposition the TSS-15 amplifier if direct sunlight or lighting is shining on the TSS-15’s remote control sensor.
K
Kathy GrossAug 21, 2025
What to do if my Yamaha Home Cinema speakers have no sound?
- S
  shannonbriggsAug 22, 2025
  If you can't hear any sound from your Yamaha Home Cinema speakers, ensure that the speakers and other components are properly connected. Select the appropriate input and increase the volume. Also, check if the TSS-15 has been muted and if so, press the [MUTE] button to unmute it.
S
Stephanie HurstAug 26, 2025
Why is there noise coming from my Yamaha Home Cinema speakers?
- J
  James ReeseAug 26, 2025
  If you're hearing noise from your Yamaha Home Cinema speakers, it could be due to a low input signal level. Try increasing the output level on the source component. Also, check all audio connections to ensure they are properly connected.
R
ronald19Aug 28, 2025
What causes a humming noise in Yamaha CinemaStation TSS-15?
- P
  Pamela SandersAug 28, 2025
  A humming noise from your Yamaha Home Cinema speakers can be caused by an audio cable that is not properly connected. Check all audio connections and correct as necessary.
S
Shelly SanchezAug 30, 2025
Why is the sound distorted on my Yamaha Home Cinema system?
- C
  Christina ObrienAug 30, 2025
  Distorted sound on your Yamaha Home Cinema system can be caused by a high input signal level. Reduce the output level on the source component.
M
mcculloughjenniferSep 1, 2025
What to do if my Yamaha TSS-15 Home Cinema system doesn't work properly?
- J
  Joshua PhelpsSep 1, 2025
  If your Yamaha TSS-15 Home Cinema system isn’t working properly, it could be that the internal microprocessor has locked up due to external electrical shock or a drop in the power supply voltage. Disconnect the power cable from the wall outlet, wait for about 30 seconds, then plug it back in again.
A
Alicia AlvaradoSep 3, 2025
Why do only the front speakers output sound on my Yamaha system?
- J
  Jennifer SpearsSep 3, 2025
  If only the front speakers are outputting sound on your Yamaha system, it might be because the Auto listening mode is selected and the audio source is stereo. To use all speakers, select a Cinema DSP or Dolby Pro Logic II listening mode.
M
michaelfoxSep 5, 2025
What to do if one of my Yamaha Home Cinema speakers outputs no sound?
- W
  William WheelerSep 5, 2025
  If one of your Yamaha Home Cinema speakers isn't outputting sound, check the speaker connections to ensure it is properly connected.
D
Danny TaylorSep 7, 2025
How to troubleshoot Yamaha TSS-15 amplifier noise near other electronics?
- R
  Ryan SmithSep 7, 2025
  If you're hearing noise when the Yamaha TSS-15 amplifier is near another electronic device, the electronic device’s high-frequency circuits might be causing interference. Move the TSS-15 amplifier and the electronic device away from each other.
D
Donna SchneiderSep 10, 2025
How to fix Yamaha Home Cinema center speaker with no sound?
- B
  Brenda FisherSep 10, 2025
  If your Yamaha Home Cinema center speaker has no sound, the center speaker’s volume level might be set to minimum. Use the remote control’s SP LEVEL CENTER Up [+] button to increase the level.

Summary

Safety and Operating Precautions

General Operating Instructions

Detailed list of precautions for safe and proper operation of the system.

Electrical Safety Warning

Warning to reduce the risk of fire or electric shock by avoiding rain or moisture.

Getting to Know the TSS-15

Installing the Speakers

Speaker Installation Details

Hooking Up the System

Component Connection Diagram

Illustrates how to connect various audio components to the TSS-15 amplifier.

Connecting the Speakers

Front Speaker Connections

Guide for connecting the front left and right speakers to the amplifier.

Surround Speaker Connections

Guide for connecting the surround left and right speakers to the amplifier.

Center Speaker Connection

Subwoofer Connection

Connecting Input Sources

Digital Input 1 and 2 Connections

Digital Input 3 Connection

Analog Input 4 Connection

Connecting the Power Cable

AC Adapter and Power Cable Setup

Basic Operation

Listening to a Sound Source

How to turn on the system, select a source, and play audio.

Adjusting Speaker Levels

How to adjust the volume levels for subwoofer, center, and surround speakers.

Muting and Turning Off

Adjusting Speaker Levels with Test Tone

Using the Built-in Test Tone

Guide on how to use the test tone to equalize speaker volume for optimal listening.

Using Cinema DSP Modes

Cinema DSP Listening Mode Overview

Other Listening Modes

Troubleshooting

System Power Issues

Solutions for the TSS-15 turning itself off immediately after power-on.

No Sound or Speaker Issues

Troubleshooting steps for no sound, single speaker silence, or only front speakers outputting audio.

Noise and Distortion Problems

Addressing humming noise, distorted sound, and interference from other electronic devices.

Troubleshooting Continued

Source and Connectivity Issues

Resolving problems with Dolby Digital/DTS sources, audio connections, and input signal levels.

Remote Control Malfunctions

Yamaha CinemaStation TSS-15 Specifications

General

Configuration	5.1
Satellite Speakers	4
Center Speaker	1
Subwoofer	1
Subwoofer Type	Active
Subwoofer Power	50 W
Frequency Response	30 Hz - 20 kHz
Impedance	6 ohms
Type	Home Cinema speakers