How to troubleshoot no sound on Yamaha Home Cinema speakers?
If there is no sound from your Yamaha Home Cinema speakers, first, ensure that the speaker cables are securely connected. Also, check if the subwoofer cable is securely connected. Finally, make sure that the VOLUME control is not set to 0; if it is, turn the VOLUME control to the right (clockwise).
Why is the sound level too low on my Yamaha NS-P270?
If the sound level is too low on your Yamaha Home Cinema speakers, ensure that the speaker cables are connected correctly, matching L (left) to L, R (right) to R, “+” to “+” and “–” to “–.” Also, if you are playing a sound source that includes inadequate bass frequencies, try playing a sound source that includes more bass frequencies. Furthermore, the sound level may have been diminished by standing waves, so reposition the subwoofer, or break up the parallel wall surface by placing bookshelves or other large objects along the wall.
What to do if my Yamaha NS-P270 have no power?
If power is not supplied to your Yamaha Home Cinema speakers even though the POWER switch is set to the ON position, turn the power switch OFF, then connect the power plug securely.
General| Type | Home theatre speakers |
|---|---|
| Speakers | 4 |
| Subwoofer weight | 8500 g |
| Center speaker weight | 900 g |
| Surround speaker weight | 800 g |
| Center speaker impedance | 6 Ω |
| Satellite speakers RMS power | 30 W |
| Subwoofer dimensions (WxHxD) | 200 x 370 x 365 mm |
| Center speaker dimensions (WxDxH) | 300 x 72 x 113 mm |
| Surround speaker dimensions (WxHxD) | 105 x 113 x 151 mm |
| Audio output channels | 5.1 channels |
| Sensitivity | 85 dB |
| Frequency range | 30 - 2500 Hz |
| RMS rated power | 250 W |
| Product color | Silver |
Guidance on placing front and surround speakers for optimal sound quality.
Instructions for placing the surround back speaker in NS-P276 systems.
Guidance on placing the center speaker, including cautions for stability.
Recommendations for subwoofer placement to optimize bass effect.
Detailed steps for mounting speakers securely on a wall.
To Next Page
