EasyManua.ls Logo

Yamaha NS-P436 - User Manual

Yamaha NS-P436
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
NS-P430/
NS-P436
(NS-P430/NS-P436: NX-430P + NX-C430 + YST-SW015)
HOME CINEMA 5.1CH SPEAKER PACKAGE/
HOME CINEMA 6.1CH SPEAKER PACKAGE
OWNER’S MANUAL
U B
NS-P430-436(UB)-PREc 03.2.28, 7:02 PM1

Other manuals for Yamaha NS-P436

Questions and Answers

  • A
    Allison BarnesAug 10, 2025
    Why do my Yamaha NS-P436 Home Cinema speakers have no sound?
    • A
      Anthony WalkerAug 10, 2025
      If your Yamaha Home Cinema speakers aren't producing sound, make sure the speaker cables are securely connected. Also, check that the VOLUME control isn't set to 0; if it is, turn it to the right.
  • F
    Frank McgeeAug 15, 2025
    Why is the sound level too low on my Yamaha NS-P436 Home Cinema speakers?
    • A
      Amanda LiAug 15, 2025
      If the sound level from your Yamaha Home Cinema speakers is too low, it might be that the speaker cables are not connected correctly. Connect them correctly, ensuring L (left) goes to L, R (right) goes to R, “+” goes to “+” and “–” goes to “–.”
  • K
    Kevin MeyersAug 20, 2025
    Why won't my Yamaha Home Cinema subwoofer turn on automatically?
    • W
      William HarrisAug 20, 2025
      If your Yamaha Home Cinema subwoofer isn't turning on automatically, check the following: 1. Ensure the POWER switch is set to the ON position. 2. Make sure the STANDBY/ON button is set to the ON position. 3. Verify the AUTO STANDBY switch is set to the “HIGH” or “LOW” position. 4. If the level of input signal is too low, set the AUTO STANDBY switch to the “HIGH” position.
  • B
    Bill FlowersAug 26, 2025
    What to do if my Yamaha Home Cinema subwoofer turns on unexpectedly?
    • K
      Kelly BeardAug 26, 2025
      If your Yamaha Home Cinema subwoofer turns on unexpectedly, it could be due to noise from external appliances. Try moving the subwoofer farther away from such appliances and/or repositioning the connected speaker cables. Alternatively, set the AUTO STANDBY switch to the “OFF” position.
  • T
    Tyler CrawfordAug 31, 2025
    Why does my Yamaha Home Cinema subwoofer turn into standby mode unexpectedly?
    • E
      Eric Munoz DDSAug 31, 2025
      If your Yamaha Home Cinema subwoofer is unexpectedly entering standby mode, it might be because the level of input signal is too low. Try setting the AUTO STANDBY switch to the “HIGH” position.
  • S
    Shelby CarrilloSep 4, 2025
    Why isn't power supplied to my Yamaha Home Cinema speakers?
    • M
      marcus20Sep 4, 2025
      If your Yamaha Home Cinema speakers aren't receiving power, even when the STANDBY/ON button is in the ON position, ensure the power plug is securely connected. Also, check that the POWER switch is set to the ON position.

Yamaha NS-P436 Specifications

General IconGeneral
Speaker Configuration5.1
Subwoofer Frequency Response28 Hz - 200 Hz
Front Speaker Power Handling120 W
Center Speaker Power Handling100 W
Surround Speaker Power Handling100 W
Subwoofer Power Handling100 W
Impedance6 Ohms
Magnetic ShieldingYes
Weight (Subwoofer)8.5 kg
Subwoofer TypeActive
Center Speaker Frequency Response70 Hz-36 kHz
Dimensions (Subwoofer)290 x 290 x 328 mm
Weight (Front Speaker)2.5 kg
Weight (Center Speaker)1.5 kg
Center Speaker TypeAcoustic suspension

Related product manuals