Yamaha D5000 - System Structure

6 - System structure
D5000
System structure
The D5000 has three operational modes:
• Program Select Mode - Use this mode to STORE and RECALL programs.
• Parameter Edit Mode - This mode allows you to edit the various operational parameters,
the DELAY/FREEZE parameters, the FB (feedback) parameters, the MOD (modulation)
parameters, and the DUCK parameters.
The Parameter Edit Mode performs differently according to which program type is active.
DUAL (stereo) and SINGLE (mono) programs are delay programs. You access their
parameters with the [ DELAY ] , [ FB ] , [ MOD ] , and [ DUCK ] keys. The parameters for the
FREEZE and S&H (sample and hold) programs are accessed using the [ DELAY ] key only.
• Utility Mode - Customize the operation of the D5000 by modifying the following
parameters: SOFTWARE PROTECT, PARAMETER DISPLAY, FOOT SW (footswitch)
FUNCTION, MIDI SETUP, MIDI CONTROLLER, MIDI BULK DUMP, PARAMETER
COPY, and REPEAT DELAY (This last parameter is only available when the program type
is DUAL or SINGLE).