To Next PageTo Next Page
Need help?Do you have a question about the Yamaha DSR118W and is the answer not in the manual?
General| Subwoofer type | Active subwoofer |
|---|---|
| Number of subwoofers | 1 |
| Subwoofer peak power | 1020 W |
| Subwoofer sensitivity | 132 dB |
| Subwoofer frequency range | 40 - 130 Hz |
| Subwoofer driver diameter (imperial) | 18 \ |
| XLR in | Yes |
| Product color | Black |
| Power consumption (typical) | 100 W |
Weight and Dimensions| Subwoofer depth | 584 mm |
|---|---|
| Subwoofer width | 520 mm |
| Subwoofer height | 638 mm |
| Subwoofer weight | 42000 g |
Diagrams and part information for critical power and processing circuit boards.
Diagrams and part information for BRG, LED, and IN circuit boards.
Step-by-step guide for disassembling the DSR112 speaker, including grille, speaker, horn, LED, and amp.
Procedures for removing grille, speaker, and horn from DSR115.
Procedures for removing grille, speakers, and horn from DSR215.
Procedures for removing grille and speaker from DSR118W.
Procedures for removing shield assembly and AMPS1 circuit board.
Procedures for removing ACIN board and CNT assembly.
Procedures for removing BRG3 and DSP/ASP circuit boards.
Procedure to remove the IN3 circuit board.
Required items, software preparation, and connection setup for the test program.
Steps to activate the diagnostic mode and service inspection application.
Overview of inspection items and procedures.
Inspect AD input port voltage and confirm LED functionality.
Inspect on/off status of switches.
Inspect DSP communication and analog mute function.
Inspect output level when digital mute is active.
Explanation of title bar, buttons, menu, toolbars, tree, and list windows.
Explanation of property, output, function key, and status windows.
Details about communication errors and their causes.
Conditions and equipment needed for accurate measurements.
List of inspection items including power, adjustments, and confirmations.
Measuring instruments, jigs, and connection setup for DSR118W.
Preparation, power indicator, power consumption, and AMPS adjustment for DSR118W.
Inspection items for DSR118W including power, frequency, thermal, LED disable, and gain.
Inspection items for DSR118W including frequency, polarity, distortion, output, and DC protection.
Inspection items for DSR118W including power protection, limiter, peak, and noise level.
Tools, software prep, and connection for firmware updating.
Steps for performing the firmware update operation.
Problem and countermeasure for missing or incorrect Update.ini file.
Problem and countermeasure for missing DSR.mot file.
Problem and countermeasure for missing DSR.id file.
Problem and countermeasure for unregistered DSR.mot and DSR.id files.
Problem and countermeasure for failure to connect to the target device.
Problem and countermeasure when target is not in firmware update mode.
Problem and countermeasure for COM port issues during update.
Abbreviations for different destination models.
Important safety components must be replaced with specified parts.
Block diagram illustrating the overall system structure.
Detailed circuit diagrams for various sections of the speaker.
Part 1/3 of the DSP circuit diagram.
Part 2/3 of the DSP circuit diagram.
Part 3/3 of the DSP circuit diagram.
