What to do if my Yamaha DZR315 Speakers [LIMIT] indicator remains lit?
If the [LIMIT] indicator on your Yamaha Speakers remains lit or frequently lights up, it indicates that the input signal is too large. To reduce the activation of the [LIMIT] indicator, either reduce the MASTER Level or lower the level of the input signal.
What to do if Yamaha DZR315 screen display goes off in a few seconds?
If the screen display goes off after a few seconds, the BLACKOUT function may be set to ON. Press either the main knob or the [ ] (Back) key to return to the normal display. To turn this setting off permanently, navigate from the HOME screen to UTILITY ? PANEL SETUP ? BLACKOUT and turn the setting off.
Why Yamaha DZR315 Speakers screen display goes off after a few moments?
If the display goes off after a few moments, the protection function for the display is likely active. Press either the main knob or the [ ] (Back) key to return to the normal display.
What to do if Yamaha Speakers operating panel locks up after turning the power back on?
This issue happens when TEMPORARILY (TEMP) is selected when removing the PANEL LOCK. When TEMPORARILY (TEMP) is selected, the panel lock is temporarily released, but it is applied again when turning the power back on. To permanently remove the panel lock, select PERMANENTLY (OK).
General| Enclosure Material | Birch Plywood |
|---|---|
| Type | Active |
| Woofer | 15" |
| Mid-range Driver | 8-inch |
| Tweeter | 1.4" |
| Amplifier Class | Class-D |
| Power Output | 2000W |
| Power rating | 2000W |
| Frequency Response | 40Hz - 20kHz |
| Coverage angle | 90° x 60° |
| Inputs | 2 x XLR/TRS Combo |
| Outputs | 2 x XLR |
| I/O Connectors | XLR, TRS, RCA, EtherCon, PowerCON |
| Power requirements | 100-240V, 50/60Hz |
| Power consumption | 240W |
| Dimensions (W x H x D) | 450 mm x 823 mm x 526 mm (17.7" x 32.4" x 20.7") |
| Weight | 34.0 kg (75.0 lbs) |
| Net Weight | 32.5 kg |
To Next Page
