What to do if my Yamaha DZR315 Speakers [LIMIT] indicator remains lit?
If the [LIMIT] indicator on your Yamaha Speakers remains lit or frequently lights up, it indicates that the input signal is too large. To reduce the activation of the [LIMIT] indicator, either reduce the MASTER Level or lower the level of the input signal.
What to do if Yamaha DZR315 screen display goes off in a few seconds?
If the screen display goes off after a few seconds, the BLACKOUT function may be set to ON. Press either the main knob or the [ ] (Back) key to return to the normal display. To turn this setting off permanently, navigate from the HOME screen to UTILITY ? PANEL SETUP ? BLACKOUT and turn the setting off.
Why Yamaha DZR315 Speakers screen display goes off after a few moments?
If the display goes off after a few moments, the protection function for the display is likely active. Press either the main knob or the [ ] (Back) key to return to the normal display.
What to do if Yamaha Speakers operating panel locks up after turning the power back on?
This issue happens when TEMPORARILY (TEMP) is selected when removing the PANEL LOCK. When TEMPORARILY (TEMP) is selected, the panel lock is temporarily released, but it is applied again when turning the power back on. To permanently remove the panel lock, select PERMANENTLY (OK).
General| Enclosure Material | Birch Plywood |
|---|---|
| Type | Active |
| Woofer | 15" |
| Mid-range Driver | 8-inch |
| Tweeter | 1.4" |
| Amplifier Class | Class-D |
| Power Output | 2000W |
| Power rating | 2000W |
| Frequency Response | 40Hz - 20kHz |
| Coverage angle | 90° x 60° |
| Inputs | 2 x XLR/TRS Combo |
| Outputs | 2 x XLR |
| I/O Connectors | XLR, TRS, RCA, EtherCon, PowerCON |
| Power requirements | 100-240V, 50/60Hz |
| Power consumption | 240W |
| Dimensions (W x H x D) | 450 mm x 823 mm x 526 mm (17.7" x 32.4" x 20.7") |
| Weight | 34.0 kg (75.0 lbs) |
| Net Weight | 32.5 kg |
Details the various terminals and indicators on the rear panel of the speakers.
Covers Dante jacks, indicators ([LINK], [1G], [SYNC]), and their functions.
Explains fundamental operations like using the main knob and back key.
Details the procedures for resetting the product to its default settings.
Explains how to recall, store, clear, edit titles, and protect presets.
Details configuring signal routing, Dante input levels, and output levels.
Used for configuring device settings and managing settings data via USB.
Locks the operating panel to prevent inadvertent errors and allows PIN code management.
Configures Dante settings and displays the Dante network status.
Configures network settings for controlling the product with an external device.
Updates the product firmware and Dante module firmware using a USB flash drive.
Explains Dante technology, network protocols, and connection methods.
Covers configuration of Dante settings via the DANTE SETUP screen.
Offers solutions for common problems like no power, no sound, or display issues.
Lists detailed technical specifications for the DZR and DXS-XLF series speakers.
To Next Page
