What to do if Yamaha E40XWT Outboard Motor trim gauge always shows fully tilted up position?
If the trim gauge always shows a fully tilted-up position, the trim sender signal is not being received. Connect the pink lead connectors to each other.
Why Yamaha Outboard Motor boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
How to setup Yamaha E40XWT Outboard Motor tachometer to show the oil pressure?
Select the oil press. display.
General| Engine Type | 2-Stroke |
|---|---|
| Horsepower | 40 hp |
| Fuel System | Carburetor |
| Displacement | 703 cc |
| Shaft Length | 20 inches |
| Starting System | Manual |
| Full Throttle RPM Range | 4500-5500 rpm |
| Fuel Tank Capacity | 24 Liters |
| Gear Ratio | 2.00 |
To Next Page
