Periodic maintenance and adjustment
9-31
9
EAUV0271
Replacing the license plate
light bulb
1. Remove the license plate unit by
removing the screws.
2. Remove the license plate light lens
by removing the screws.
3. Remove the burnt-out bulb by
pulling it out from the socket.
4. Insert a new bulb into the socket.
5. Install the license plate light lens
by installing the screws.
6. Install the license plate light cover
by installing the screws.
1. License plate light unit
2. Screw
2
1
ZAUV0482
1. License plate light lens
2. Screw
1. License plate light bulb
UB8BE0E0.book Page 31 Wednesday, April 11, 2018 9:35 AM
To Next Page
Loading...
Need help?
General