Specifications and requirements
14
EMU40501
Specifications
“(SUS)” indicates that the specification is for
the outboard motor when it is equipped with
a stainless steel propeller.
EMU2821U
Dimension and weight:
Overall length:
826 mm (32.5 in)
Overall width:
522 mm (20.6 in)
Overall height L:
F115B 1629 mm (64.1 in)
F115BET1 1629 mm (64.1 in)
Overall height X:
1756 mm (69.1 in)
Motor transom height L:
F115B 516 mm (20.3 in)
F115BET1 516 mm (20.3 in)
Motor transom height X:
643 mm (25.3 in)
Dry weight (SUS) L:
F115B 175 kg (386 lb)
F115BET1 175 kg (386 lb)
Dry weight (SUS) X:
179 kg (395 lb)
Performance:
Full throttle operating range:
5300–6300 r/min
Rated power:
84.6 kW (115 HP)
Idle speed (in neutral):
650–750 r/min
Power unit:
Type:
4-stroke DOHC L4 16 valves
Total displacement:
1832 cm³ (111.8 c.i.)
Bore × stroke:
81.0 × 88.9 mm (3.19 × 3.50 in)
Ignition system:
TCI
Spark plug (NGK):
LKR6E
Spark plug gap:
0.8–0.9 mm (0.031–0.035 in)
Steering system:
Remote steering
Starting system:
Electric starter
Starting carburetion system:
Fuel injection
Valve clearance IN (cold engine):
0.17–0.24 mm (0.0067–0.0094 in)
Valve clearance EX (cold engine):
0.31–0.38 mm (0.0122–0.0150 in)
Cold cranking amps (CCA/SAE):
380–1150 A
Marine cranking amps (MCA/ABYC):
502–1370 A
Min. reserve capacity (RC/SAE):
124 minutes
Cold cranking amps (CCA/EN):
430–1080 A
Min. rated capacity (20HR/IEC):
70 Ah
Maximum generator output:
35 A
Lower unit:
Gear shift positions:
Forward-neutral-reverse
Gear ratio:
2.15 (28/13)
Trim and tilt system:
Power trim and tilt
Propeller mark:
F115B K
F115BET1 K
FL115BET1 KL
LF115B KL
U6EK30E0.book Page 14 Wednesday, January 29, 2014 4:03 PM
To Next Page
Loading...
