Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MODX Reference Manual
Normal Part (FM-X) Edit
Common
Part Settings
General
Algorithm
Zone Settings
Zone Transmit
Pitch / Filter
Pitch
PEG/Scale
Filter Type
Filter EG
Filter Scale
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
2nd LFO
Control Assign
Receive SW
Operator
Form / Freq
Level
Copy or Exchange
Operators
151
Reference
Rev Send (Reverb Send)
Determines the Send level of the signal sent from Insertion Effect A/B to the Reverb effect.
Settings: 0–127
Var Send (Variation Send)
Determines the Send level of the signal sent from Insertion Effect A/B to the Variation effect.
Settings: 0–127
Part Output (Part Output Select)
Determines the specific audio output.
Settings: MainL&R, USB1&2...USB7&8, USB1...USB8, Off
MainL&R: Outputs in stereo (two channels) to the OUTPUT [L/MONO]/[R] jacks.
USB1&2…USB7&8: Outputs in stereo (Channels 1&2–7&8) to the [USB TO HOST] terminal.
USB1…USB8: Outputs in mono (Channels 1–8) to the [USB TO HOST] terminal.
Off: No audio signal for the Part is output.
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 77).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 78).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 81).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 82).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 85).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 87).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 88).
Same as the Element Common Edit parameters for Normal Parts (AWM2) (page 91).
Ins A (Insertion Effect A)
Ins B (Insertion Effect B)
EQ (Part Equalizer)
Ins Assign (Insertion Assign)
Arpeggio
Common
Individual
Advanced
Motion Seq (Motion Sequencer)
Common
Lane
To Next Page
Loading...
Need help?
General
