5
Specifications
General specifications
Type.......................................... Bi-Amp 2-way Bass Reflex Powered Speaker
Crossover Frequency................. 2.5 kHz
Frequency Range ...................... 50 Hz–40 kHz
Maximum Output Level............ 101 dB (1 m on Axis)
Dimensiones (W × H × D) ........ 169 × 279 × 222 mm
Weight ...................................... 7.5 kg
Speaker unit
Speaker Unit ............................. LF: 12 cm cone (4 , magnetic shielded)
HF: 2.5 cm titan dome (6 , magnetic shielded)
Enclosure .................................. Type: Bass Reflex
Volume: 6.3 l
Amp.unit
Maximum Output Power .......... LF: 40 W at 400 Hz, THD= 0.02%, RL=4
HF: 27 W at 10 kHz, THD= 0.02%, RL=6
Input Sensitivity/Impedance...... Line 1: +4 dB/10 k (XLR Blanced)
Line 2: –10 dB/10 k (phone Unblanced)
Signal to Noise Ratio ................ 100 dB (A Weighted)
Controls .................................... TRIM switch
LOW: 4 positions (+1.5 dB, 0 dB, –1.5 dB, –3 dB at 60 Hz)
HIGH: 3 positions (+1.5 dB, 0 dB, –1.5 dB at 15 kHz)
Power switch: On/Off
VOL control
Power Indicator ........................ Green LED
Power Requirement .................. USA and Canada: AC120 V, 60 Hz
Europe: AC230 V, 50 Hz
Others: AC240 V, 50 Hz
Power Consumption ................. 60 W
Accessories ............................... Non-skid pads × 2
Specifications and appearance are subject to change without notice.
Dimensions
W: 169
H: 279
171.5
D: 222
20*
7
43.5
110*
Unit: mm* Non-skid pad positions.
To Next Page
Loading...
