Do you have a question about the Yamaha MS300 and is the answer not in the manual?
Turns the unit on and off. The POWER indicator lights up green when the unit is on.
Connect the included power cord to this connector.
Accept line-level sources such as mixers via XLR or 1/4" phone jacks.
Adjusts the signal level input from the LINE connectors.
Balanced XLR-3-31 connector for mic-level sources with a 70 Hz low-cut filter.
Adjusts the signal level input at the MIC connector.
Turns the unit on and off. The POWER indicator lights up green when the unit is on.
Connect the included power cord to this connector.
Accept line-level sources such as mixers via XLR or 1/4" phone jacks.
Adjusts the signal level input from the LINE connectors.
Balanced XLR-3-31 connector for mic-level sources with a 70 Hz low-cut filter.
Adjusts the signal level input at the MIC connector.
Loading...