PERIODIC MAINTENANCE AND MINOR REPAIR
6-31
6
3. Remove the defective bulb by pull-
ing it out from the socket.
4. Insert a new bulb into the socket.
5. Install the license plate light lens
by installing the screws.
6. Install the license plate light cover
by installing the screws.
EAU36840
Replacing an auxiliary light
bulb
This model is equipped with three aux-
iliary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove the headlight unit by re-
moving the bolts on each side.
1. Screw
2. License plate light lens
1. License plate light bulb
1. Auxiliary light bulb A
2. Auxiliary light bulb B
3. Auxiliary light bulb C
U5YUE3E0.book Page 31 Thursday, September 20, 2007 3:03 PM
To Next Page
Loading...
