Yamaha MT 10 - General Maintenance and Lubrication Chart

Periodic maintenance and adjustment
8-5
1
2
3
4
5
6
7
8
9
10
11
12
EAU71351
General maintenance and lubrication chart
NO. ITEM CHECK OR MAINTENANCE JOB
ODOMETER READING
ANNUAL
CHECK
1000 km
(600 mi)
10000 km
(6000 mi)
20000 km
(12000 mi)
30000 km
(18000 mi)
40000 km
(24000 mi)
1 *
Diagnostic system
check
• Perform dynamic inspection using
Yamaha diagnostic tool.
• Check the error codes.

2 * Air filter element • Replace. Every 40000 km (24000 mi)
3Clutch
• Check operation.
• Adjust.

4 * Front brake
• Check operation, fluid level, and
for fluid leakage.
• Replace brake pads if necessary.

5 * Rear brake
• Check operation, fluid level, and
for fluid leakage.
• Replace brake pads if necessary.

6 * Brake hoses
• Check for cracks or damage. 
• Replace. Every 4 years
7 * Brake fluid • Change. Every 2 years
8 * Wheels
• Check runout and for damage.
• Replace if necessary.

9 * Tires
• Check tread depth and for
damage.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.

10 * Wheel bearings
• Check bearing for looseness or
damage.

11 *
Swingarm pivot
bearings
• Check operation and for
excessive play.

• Lubricate with lithium-soap-based
grease.
Every 50000 km (30000 mi)
BW8-9-20_1.book 5 ページ ２０１６年１２月１３日 火曜日 午前１１時１８分