For your safety – pre-operation checks
6-2
1
2
3
4
5
6
7
8
9
10
11
12
Rear brake
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add specified brake fluid to specified level.
• Check hydraulic system for leakage.
8-21, 8-22
Clutch
• Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
8-20
Throttle grip
• Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, have Yamaha dealer adjust throttle grip free play and lubricate cable
and grip housing.
8-16, 8-26
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
8-26
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
8-24, 8-25
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
8-17, 8-19
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
8-27
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
8-27
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
8-28
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
ITEM CHECKS PAGE
BS2-9-13.book 2 ページ ２０１９年７月２５日 木曜日 午前１１時１分
To Next Page